NCP WB Acrylic Sealer
A very cost-efficient topcoat for grind and seal systems & overlays.
Description
How To Use
Before coating, the floor must be clean and free of oil, dirt, and chemical residue. Acid stained floors must be rinsed thoroughly to be free of any residues, and dry before sealing
Application
To the clean dry floor, apply EZ WB Acrylic by roller. Apply three thin coats at the rate of 300-400 sq. ft. per gallon for each coat. Allow each coat to dry for one hour and apply the next coat. Allow drying for 23 hours before allowing traffic. Do not over-apply. Make sure concrete is cured and totally dry before applying. Do not allow to puddle.
Coverage
500-600 sq. ft. per gallon.
Additional information
| Size | 1 Gal, 5 Gal |
|---|
